ARF (Shanghai) Advanced Materials Technology Co., Ltd. specializes in supplying Chemours Krytox GPL 100 PFPE perfluoropolyether fluorinated lubricant oil. This low-viscosity PFPE oil is suitable for precision bearings, valves, seals, O-rings, low-load sliding components, oxygen systems, semiconductor equipment, chemical equipment, and precision machinery lubrication. It features non-flammability, chemical inertness, excellent fluidity, low volatility, and long-lasting lubrication.
Krytox GPL 100 is a low-viscosity PFPE perfluoropolyether fluorinated lubricant oil in the Chemours Krytox GPL series. It is a transparent liquid with excellent chemical stability, non-flammability, low volatility, and broad material compatibility. It is suitable for special lubrication environments where conventional mineral oils, synthetic oils, or silicone oils cannot maintain stable performance.
Compared with Krytox GPL 101, GPL 100 has lower viscosity and better fluidity, making it more suitable for ultra-low-resistance, low-load, low-temperature start-up, and precision lubrication applications. For applications requiring stronger oil film retention or slightly higher load capacity, Krytox GPL 101, GPL 102, or higher-viscosity grades may be considered.
Product Name: Krytox GPL 100
Chinese Name: Chemours Krytox GPL 100 PFPE Perfluoropolyether Fluorinated Lubricant Oil
English Name: Chemours Krytox GPL 100 PFPE Fluorinated Lubricant Oil
Brand: Krytox
Manufacturer: Chemours
Product Type: PFPE Perfluoropolyether Lubricant Oil / Fluorinated Lubricant Oil / Low-Viscosity High-Performance Lubricant
Appearance: Transparent liquid
Typical Applications: Precision bearings, valves, seals, O-rings, low-load sliding components, semiconductor equipment, oxygen systems, chemical equipment
Product Model: Krytox GPL 100
Base Oil Type: PFPE Perfluoropolyether
Appearance: Transparent liquid
Key Properties: Non-flammable, chemically inert, low viscosity, excellent fluidity, low volatility, long-lasting lubrication
Documentation Support: TDS / SDS / COA
Note: The above information is for general reference. Specific viscosity, temperature range, and other technical values should be confirmed according to the original manufacturer’s TDS, SDS, COA, and actual operating condition tests.
Krytox GPL 100 is one of the lower-viscosity grades in the Krytox GPL series. It is suitable for applications requiring low friction, fast spreading, low starting resistance, and precision lubrication.
Krytox GPL 100 is based on a PFPE perfluoropolyether system and does not easily react with most acids, alkalis, solvents, oxidizing gases, or chemical media. It is suitable for chemical equipment, specialty gas systems, valves, seals, and semiconductor equipment.
Krytox GPL 100 is non-flammable and can be used in oxygen systems, specialty gas valves, instrumentation components, and high-safety equipment. Compared with conventional lubricants, PFPE fluorinated lubricants offer advantages in environments where combustion or oxidation risks must be reduced.
GPL 100 is more suitable for low-load, low-resistance, high-precision lubrication applications, such as precision bearings, small sliding parts, instrument valves, O-rings, seals, and automation equipment components.
Krytox GPL 100 is generally compatible with most metals, plastics, and elastomer materials. It can be used for O-rings, rubber seals, plastic components, metal bearings, and precision sliding parts. Compatibility testing is recommended before application.
Krytox GPL 100 is suitable for low-load precision bearings, small motor bearings, instrument bearings, and low-resistance moving components. Its low viscosity helps reduce starting resistance and improve movement smoothness.
GPL 100 can be used for gas valves, oxygen valves, chemical valves, O-rings, seals, and sliding sealing components. It is suitable for sealing systems requiring low friction, easy assembly, chemical resistance, and non-flammability.
Semiconductor equipment often requires lubricants with low volatility, low contamination, chemical stability, and material compatibility. Krytox GPL 100 can be used for certain precision transmission parts, valves, seals, and low-load sliding components.
Krytox GPL 100 is suitable for oxygen systems, specialty gas valves, gas instruments, and sealing lubrication. Actual applications should be evaluated according to pressure, temperature, media, and safety requirements.
In chemical equipment, conventional lubricants may be affected by acids, alkalis, solvents, steam, or oxidizing gases. Krytox GPL 100 provides chemical inertness and can be used for certain chemical valves, instruments, seal assemblies, and low-load lubrication points.
Due to its low viscosity and good fluidity, GPL 100 is suitable for precision machinery, low-resistance sliding components, small moving parts, and instrument lubrication.
Krytox GPL 100, GPL 101, and GPL 102 are all low-viscosity PFPE fluorinated lubricant oils in the Krytox GPL series. The main differences are viscosity, fluidity, and oil film retention.
Krytox GPL 100: Lowest viscosity and best fluidity, suitable for ultra-low-resistance, low-load, and precision lubrication applications.
Krytox GPL 101: Slightly higher viscosity than GPL 100, providing better oil film retention while still maintaining good fluidity.
Krytox GPL 102: Higher viscosity than GPL 101, providing a thicker lubricating film and better retention for slightly higher-load applications.
When selecting Krytox GPL 100, the following factors should be confirmed:
Whether very low viscosity and low-resistance lubrication are required.
Whether the application involves precision bearings, small sliding parts, valves, or seals.
Whether low-temperature start-up or fast spreading is required.
Whether the lubricant will be exposed to oxygen, specialty gases, or strong oxidizing environments.
Whether it will contact acids, alkalis, solvents, steam, or corrosive media.
Whether low volatility, low contamination, and clean lubrication are required.
Whether plastics, rubber, O-rings, or special sealing materials are involved.
Whether TDS, SDS, COA, or batch documentation support is required.
Clean mineral oil, synthetic oil, silicone oil, or rust-preventive oil before use to avoid mixing different lubrication systems.
PFPE fluorinated lubricant oils are generally not recommended to be mixed with conventional lubricants.
Compatibility testing is recommended for plastics, rubber, O-rings, and special sealing materials.
For oxygen systems, semiconductor equipment, and chemical equipment applications, suitability should be confirmed based on manufacturer documentation and actual operating conditions.
Krytox GPL 100 is a low-viscosity oil grade that is more suitable for low-load, low-resistance, and precision lubrication. It is not recommended for heavy-load or thick-film-demanding applications without proper evaluation.
If customers require stronger oil film retention or higher load capacity, Krytox GPL 101, GPL 102, GPL 105, GPL 106, or GPL 107 may be considered depending on the working conditions.
Krytox GPL 100 is a low-viscosity PFPE perfluoropolyether fluorinated lubricant oil in the Chemours Krytox GPL series. It is suitable for precision bearings, valves, seals, oxygen systems, semiconductor equipment, and low-load lubrication applications.
Krytox GPL 100 is a PFPE fluorinated lubricant oil, not a grease. If grease is required, the Krytox GPL 200 series can be selected according to viscosity and working conditions.
It is mainly used for precision bearings, valves, seals, O-rings, low-load sliding parts, oxygen systems, semiconductor equipment, chemical equipment, and precision machinery lubrication.
Krytox GPL 100 is non-flammable and chemically inert, making it suitable for oxygen systems and specialty gas environments. Actual applications should still be confirmed based on pressure, temperature, media, and relevant safety requirements.
Krytox GPL 100 has lower viscosity and better fluidity. Krytox GPL 101 has slightly higher viscosity and better oil film retention.
Krytox GPL 100 is more focused on low-viscosity and precision lubrication. For heavy-load or high-temperature bearing applications, Krytox GPL 105, GPL 106, or GPL 107 is generally recommended.
For inquiries about Krytox GPL 100 PFPE perfluoropolyether fluorinated lubricant oil, low-viscosity fluorinated lubricant oil, oxygen system lubricant, semiconductor equipment lubricant, or other Krytox GPL series grades, please contact ARF (Shanghai) Advanced Materials Technology Co., Ltd.
Company Name: ARF (Shanghai) Advanced Materials Technology Co., Ltd.
Product Name: Krytox GPL 100
Applications: Precision Bearings / Valves / Seals / O-Rings / Oxygen Systems / Semiconductor Equipment / Chemical Equipment / Precision Machinery
Documentation Support: TDS / SDS / COA
Email:arf1678@163.com
